Original catalogue drawing - FAG Schaeffler HR 1, page 270
Scanned from the manufacturer catalogue page listing this part number. All part numbers printed on that table share the same drawing.
Scale cross-section
Blue = inner / outer ring, yellow = rolling element. Drawn to scale from this part's own
dimensions for selection reference only - not a manufacturing or assembly drawing.
Dimension table (mm / inch)
Symbol
Dimension
mm
inch
d
Bore diameter
130
5.1181
D
Outside diameter
200
7.874
B
Inner-ring / bearing width
22
0.8661
r
Chamfer (min)
1.1
0.0433
Notes
Weights are given in kg. Load ratings are shown in both the original catalogue units and the converted value (1 N = 0.2248 lbf). Data is provided for selection reference only - confirm against the latest official catalogue before ordering.
Main dimensions
Bore d (mm)
130
Outside dia. D (mm)
200
Width B (mm)
22
Inner-ring OD d1 (mm)
154.7
Inner-ring shoulder dia. D1 (mm)
176.7
Load ratings & speeds
Basic dynamic load rating Cr (lbs)
18884
Basic static load rating Cor (lbs)
18434
Basic dynamic load rating Cr (N)
84000
Basic static load rating C0r (N)
82000
Fatigue limit load Cur (N)
3650
Factor f0
16.4
Limiting speed nG (rpm)
4,650
Reference speed nB (rpm)
3,450
Weight
Weight (kg)
2.41
Mounting dimensions (fillets / shoulders)
Housing fillet r max (mm)
1.1
Shaft shoulder da (mm)
136
Housing shoulder Da (mm)
194
Housing fillet ra max (mm)
1
Bearing life (ISO 281 basic rating life)
C / P
Equivalent load P (N)
L10 (106 rev)
L10h at 1,500 rpm
4
21,000
64
711
6
14,000
216
2,400
8
10,500
512
5,689
10
8,400
1,000
11,111
15
5,600
3,375
37,500
Basic rating life per ISO 281: L10 = (C/P)3 with C = 84,000 N. Hours = L10 x 106 / (60n). Life-modification factors for lubrication, contamination and temperature (aISO) are not included.
Source & traceability
Brand
FAG
Source catalogue
FAG / Schaeffler Rolling Bearings HR 1
Catalogue page
p.270 (dimensions)
Load ratings in newtons, fatigue limit load Cur, limiting speed nG and reference speed nB.
Send us the quantity you need and we will come back with price and
lead time, normally within 24 hours. Equivalent parts from other brands can be quoted at the same time.
