Original catalogue drawing - FAG Schaeffler HR 1, page 332
Scanned from the manufacturer catalogue page listing this part number. All part numbers printed on that table share the same drawing.
Scale cross-section
Blue = inner / outer ring, yellow = rolling element. Drawn to scale from this part's own
dimensions for selection reference only - not a manufacturing or assembly drawing.
Dimension table (mm / inch)
Symbol
Dimension
mm
inch
d
Bore diameter
15
0.5906
D
Outside diameter
35
1.378
B
Inner-ring / bearing width
14
0.5512
r
Chamfer (min)
0.6
0.0236
Notes
Weights are given in kg. Load ratings are shown in both the original catalogue units and the converted value (1 N = 0.2248 lbf). Data is provided for selection reference only - confirm against the latest official catalogue before ordering.
Main dimensions
Bore d (mm)
15
Outside dia. D (mm)
35
Width B (mm)
14
Inner-ring OD d1 (mm)
20.3
Inner-ring shoulder dia. D1 (mm)
29.5
Load ratings & speeds
Basic dynamic load rating Cr (lbs)
2158
Basic static load rating Cor (lbs)
468
Basic dynamic load rating Cr (N)
9600
Basic static load rating C0r (N)
2080
Fatigue limit load Cur (N)
130
Factor e
0.46
Factor Y0
1.44
Limiting speed nG (rpm)
24,000
Reference speed nB (rpm)
21,100
Weight
Weight (kg)
0.057
Mounting dimensions (fillets / shoulders)
Housing fillet r max (mm)
0.6
Shaft shoulder da (mm)
19.2
Housing shoulder Da (mm)
30.8
Housing fillet ra max (mm)
0.6
Bearing life (ISO 281 basic rating life)
C / P
Equivalent load P (N)
L10 (106 rev)
L10h at 3,000 rpm
4
2,400
64
356
6
1,600
216
1,200
8
1,200
512
2,844
10
960
1,000
5,556
15
640
3,375
18,750
Basic rating life per ISO 281: L10 = (C/P)3 with C = 9,600 N. Hours = L10 x 106 / (60n). Life-modification factors for lubrication, contamination and temperature (aISO) are not included.
Source & traceability
Brand
FAG
Source catalogue
FAG / Schaeffler Rolling Bearings HR 1
Catalogue page
p.332 (dimensions)
Load ratings in newtons, fatigue limit load Cur, limiting speed nG and reference speed nB.
Send us the quantity you need and we will come back with price and
lead time, normally within 24 hours. Equivalent parts from other brands can be quoted at the same time.
