Original catalogue drawing - FAG Schaeffler HR 1, page 272
Scanned from the manufacturer catalogue page listing this part number. All part numbers printed on that table share the same drawing.
Scale cross-section
Blue = inner / outer ring, yellow = rolling element. Drawn to scale from this part's own
dimensions for selection reference only - not a manufacturing or assembly drawing.
Dimension table (mm / inch)
Symbol
Dimension
mm
inch
d
Bore diameter
140
5.5118
D
Outside diameter
175
6.8898
B
Inner-ring / bearing width
18
0.7087
r
Chamfer (min)
1.1
0.0433
Notes
Weights are given in kg. Load ratings are shown in both the original catalogue units and the converted value (1 N = 0.2248 lbf). Data is provided for selection reference only - confirm against the latest official catalogue before ordering.
Main dimensions
Bore d (mm)
140
Outside dia. D (mm)
175
Width B (mm)
18
Inner-ring OD d1 (mm)
150.8
Inner-ring shoulder dia. D1 (mm)
164
Load ratings & speeds
Basic dynamic load rating Cr (lbs)
9330
Basic static load rating Cor (lbs)
10341
Basic dynamic load rating Cr (N)
41500
Basic static load rating C0r (N)
46000
Fatigue limit load Cur (N)
1860
Factor f0
16
Limiting speed nG (rpm)
6,700
Reference speed nB (rpm)
3,350
Weight
Weight (kg)
0.848
Mounting dimensions (fillets / shoulders)
Housing fillet r max (mm)
1.1
Shaft shoulder da (mm)
146
Housing shoulder Da (mm)
169
Housing fillet ra max (mm)
1
Bearing life (ISO 281 basic rating life)
C / P
Equivalent load P (N)
L10 (106 rev)
L10h at 2,200 rpm
4
10,375
64
485
6
6,917
216
1,636
8
5,188
512
3,879
10
4,150
1,000
7,576
15
2,767
3,375
25,568
Basic rating life per ISO 281: L10 = (C/P)3 with C = 41,500 N. Hours = L10 x 106 / (60n). Life-modification factors for lubrication, contamination and temperature (aISO) are not included.
Source & traceability
Brand
FAG
Source catalogue
FAG / Schaeffler Rolling Bearings HR 1
Catalogue page
p.272 (dimensions)
Load ratings in newtons, fatigue limit load Cur, limiting speed nG and reference speed nB.
Send us the quantity you need and we will come back with price and
lead time, normally within 24 hours. Equivalent parts from other brands can be quoted at the same time.
