Original catalogue drawing - FAG Schaeffler HR 1, page 232
Scanned from the manufacturer catalogue page listing this part number. All part numbers printed on that table share the same drawing.
Scale cross-section
Blue = inner / outer ring, yellow = rolling element. Drawn to scale from this part's own
dimensions for selection reference only - not a manufacturing or assembly drawing.
Dimension table (mm / inch)
Symbol
Dimension
mm
inch
d
Bore diameter
4
0.1575
D
Outside diameter
9
0.3543
B
Inner-ring / bearing width
4
0.1575
r
Chamfer (min)
0.1
0.0039
Notes
Weights are given in kg. Load ratings are shown in both the original catalogue units and the converted value (1 N = 0.2248 lbf). Data is provided for selection reference only - confirm against the latest official catalogue before ordering.
Main dimensions
Bore d (mm)
4
Outside dia. D (mm)
9
Width B (mm)
4
Inner-ring OD d1 (mm)
5.2
Seal outside dia. D2 (mm)
8.1
Load ratings & speeds
Basic dynamic load rating Cr (lbs)
153
Basic static load rating Cor (lbs)
51
Basic dynamic load rating Cr (N)
680
Basic static load rating C0r (N)
225
Fatigue limit load Cur (N)
5.8
Factor f0
12.7
Limiting speed nG (rpm)
81,000
Weight
Weight (kg)
0.002
Mounting dimensions (fillets / shoulders)
Housing fillet r max (mm)
0.1
Shaft shoulder da (mm)
4.6
Housing shoulder Da (mm)
8.77
Housing fillet ra max (mm)
0.1
Bearing life (ISO 281 basic rating life)
C / P
Equivalent load P (N)
L10 (106 rev)
L10h at 3,000 rpm
4
170
64
356
6
113
216
1,200
8
85
512
2,844
10
68
1,000
5,556
15
45
3,375
18,750
Basic rating life per ISO 281: L10 = (C/P)3 with C = 680 N. Hours = L10 x 106 / (60n). Life-modification factors for lubrication, contamination and temperature (aISO) are not included.
Source & traceability
Brand
FAG
Source catalogue
FAG / Schaeffler Rolling Bearings HR 1
Catalogue page
p.232 (dimensions)
Load ratings in newtons, fatigue limit load Cur, limiting speed nG and reference speed nB.
Send us the quantity you need and we will come back with price and
lead time, normally within 24 hours. Equivalent parts from other brands can be quoted at the same time.
