Original catalogue drawing - FAG Schaeffler HR 1, page 268
Scanned from the manufacturer catalogue page listing this part number. All part numbers printed on that table share the same drawing.
Scale cross-section
Blue = inner / outer ring, yellow = rolling element. Drawn to scale from this part's own
dimensions for selection reference only - not a manufacturing or assembly drawing.
Dimension table (mm / inch)
Symbol
Dimension
mm
inch
d
Bore diameter
100
3.937
D
Outside diameter
180
7.0866
B
Inner-ring / bearing width
60.3
2.374
r
Chamfer (min)
2.1
0.0827
Notes
Weights are given in kg. Load ratings are shown in both the original catalogue units and the converted value (1 N = 0.2248 lbf). Data is provided for selection reference only - confirm against the latest official catalogue before ordering.
Main dimensions
Bore d (mm)
100
Outside dia. D (mm)
180
Width B (mm)
60.3
Inner-ring OD d1 (mm)
131
Inner-ring shoulder dia. D1 (mm)
163.7
Load ratings & speeds
Basic dynamic load rating Cr (lbs)
40690
Basic static load rating Cor (lbs)
50357
Basic dynamic load rating Cr (N)
181000
Basic static load rating C0r (N)
224000
Fatigue limit load Cur (N)
10000
Limiting speed nG (rpm)
3,200
Reference speed nB (rpm)
4,200
Effective load centre a (mm)
127
Weight
Weight (kg)
6.19
Mounting dimensions (fillets / shoulders)
Housing fillet r max (mm)
2.1
Shaft shoulder da (mm)
112
Housing shoulder Da (mm)
168
Housing fillet ra max (mm)
2.1
Bearing life (ISO 281 basic rating life)
C / P
Equivalent load P (N)
L10 (106 rev)
L10h at 1,000 rpm
4
45,250
64
1,067
6
30,167
216
3,600
8
22,625
512
8,533
10
18,100
1,000
16,667
15
12,067
3,375
56,250
Basic rating life per ISO 281: L10 = (C/P)3 with C = 181,000 N. Hours = L10 x 106 / (60n). Life-modification factors for lubrication, contamination and temperature (aISO) are not included.
Source & traceability
Brand
FAG
Source catalogue
FAG / Schaeffler Rolling Bearings HR 1
Catalogue page
p.268 (dimensions)
Load ratings in newtons, fatigue limit load Cur, limiting speed nG and reference speed nB.
Send us the quantity you need and we will come back with price and
lead time, normally within 24 hours. Equivalent parts from other brands can be quoted at the same time.
